Contact Now
Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Shandong Zhongshan Photoelectric Materials Co., Ltd
Model No.: Lithium Hexafluorophosphate LiPF6 CAS: 21324-40-3
Payment Type: L/C,T/T,Paypal
Product introduction
Lithium hexafluorophosphate (LiPF6) is a white crystal or powder, soluble in water, soluble in low concentration of methanol, ethanol, carbonate and other organic solvents, melting point is 200 ℃, the relative density of 1.50 g/cm3. LiPF6 is an important component of electrolyte, accounting for about 43% of the total cost of electrolyte. Compared with LiBF4, LiAsF6, LiClO4 and other electrolytes, lithium hexafluorophosphate has advantages in solubility, conductivity, safety and environmental protection in organic solvents, and is the most widely used lithium salt at present.
Quality Specification
| Items | Units | Specification |
| Lithium hexafluorophosphate | ω/% | ≥99.95 |
| （DMC）Dimethyl carbonate | ω/% | ≤0.0200 |
| Moisture | ω/% | ≤0.0020 |
| （HF）Free acid | ω/% | ≤0.0090 |
| （SO4）Sulfate | mg/kg | ≤5 |
| （Cl）Chlorid | mg/kg | ≤2 |
| Fe | mg/kg | ≤2 |
| K | mg/kg | ≤1 |
| Na | mg/kg | ≤2 |
| Ca | mg/kg | ≤2 |
| Cd | mg/kg | ≤1 |
| Cr | mg/kg | ≤1 |
| Cu | mg/kg | ≤1 |
| Mg | mg/kg | ≤1 |
| Ni | mg/kg | ≤1 |
| Pb | mg/kg | ≤1 |
| Zn | mg/kg | ≤1 |
| As | mg/kg | ≤1 |
Application
As an electrolyte of lithium battery, lithium hexafluorophosphate is mainly used in lithium ion power battery, lithium ion energy storage battery and other batteries.
Packaging and storage
Lithium hexafluorophosphate is packed under closed and dry conditions. Products with a net content of less than 10Kg are packed in corrosion-resistant bottles, then vacuum packaging with Al-laminated film. Products with a net content of at least 25kg are packed in stainless steel barrels, the stainless steel barrel should have a pressure-resistant capacity of more than 0.6mpa, be filled with inert gas (air pressure not less than 30kPa), and be covered with a protective cover.
Product Categories : New Energy Battery Materials > Thermal Battery Materials
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.